zmiana biblioteki LEDów
This commit is contained in:
parent
6177d8e4e9
commit
f88dbe3fb8
1 changed files with 90 additions and 37 deletions
|
|
@ -32,13 +32,12 @@
|
|||
|
||||
#include "Zigbee.h"
|
||||
#include <OneWireESP32.h>
|
||||
#include <FastLED.h>
|
||||
#include <Adafruit_NeoPixel.h>
|
||||
|
||||
#define TEMP_PIN 10
|
||||
#define PUMP_PIN 13
|
||||
#define LED_PIN 8
|
||||
|
||||
CRGB leds[1];
|
||||
#define NUM_LEDS 1
|
||||
|
||||
/* Zigbee temperature sensor configuration */
|
||||
#define ANALOG_DEVICE_ENDPOINT_NUMBER 1
|
||||
|
|
@ -50,9 +49,19 @@ struct tm timeinfo;
|
|||
struct tm *localTime;
|
||||
int32_t timezone;
|
||||
|
||||
ZigbeeTempSensor zbTempSensor = ZigbeeTempSensor(TEMP_SENSOR_ENDPOINT_NUMBER);
|
||||
ZigbeeAnalog zbAnalogTemp = ZigbeeAnalog(ANALOG_DEVICE_ENDPOINT_NUMBER);
|
||||
int8_t counter = 0;
|
||||
|
||||
ZigbeeTempSensor zbTempSensor = ZigbeeTempSensor(TEMP_SENSOR_ENDPOINT_NUMBER);
|
||||
ZigbeeAnalog zbSetTemp = ZigbeeAnalog(ANALOG_DEVICE_ENDPOINT_NUMBER);
|
||||
ZigbeeAnalog zbSetTempDelta = ZigbeeAnalog(ANALOG_DEVICE_ENDPOINT_NUMBER);
|
||||
|
||||
Adafruit_NeoPixel rgb(NUM_LEDS, LED_PIN, NEO_GRB + NEO_KHZ800);
|
||||
uint32_t red = rgb.Color(255,0,0);
|
||||
uint32_t orange = rgb.Color(255, 127, 0);
|
||||
uint32_t yellow = rgb.Color(255, 255, 0);
|
||||
uint32_t green = rgb.Color(0, 255, 0);
|
||||
uint32_t blue = rgb.Color(0, 0, 255);
|
||||
uint32_t white = rgb.Color(255, 255, 255);
|
||||
/************************ Temp sensor *****************************/
|
||||
const uint8_t MaxDevices = 1;
|
||||
static float get_temp(int gpio) {
|
||||
|
|
@ -67,7 +76,7 @@ static float get_temp(int gpio) {
|
|||
Serial.printf("Number of devices: %d\r\n", devices);
|
||||
|
||||
ds.request();
|
||||
vTaskDelay(800 / portTICK_PERIOD_MS);
|
||||
vTaskDelay(1500 / portTICK_PERIOD_MS);
|
||||
|
||||
for (int i = 0; i < devices; i++) {
|
||||
uint8_t err = ds.getTemp(addr[i], temp[i]);
|
||||
|
|
@ -76,7 +85,7 @@ static float get_temp(int gpio) {
|
|||
Serial.print(i);
|
||||
Serial.print(": ");
|
||||
Serial.println(errt[err]);
|
||||
return err;
|
||||
return err + 200;
|
||||
} else {
|
||||
avg += temp[i];
|
||||
num += 1;
|
||||
|
|
@ -89,43 +98,69 @@ static float get_temp(int gpio) {
|
|||
|
||||
/************************ Temp sensor ZigBee *****************************/
|
||||
static void temp_sensor_value_update(void *arg) {
|
||||
float temp_tmp, temp_set = 55, temp_delta;
|
||||
for (;;) {
|
||||
// Read temperature sensor value
|
||||
// float tsens_value = temperatureRead();
|
||||
float tsens_value = get_temp(TEMP_PIN);
|
||||
|
||||
// Update temperature value in Temperature sensor EP
|
||||
if(tsens_value > -50.0 && tsens_value < 150.0) {
|
||||
zbTempSensor.setTemperature(tsens_value);
|
||||
if(tsens_value < -20.0 || tsens_value > 150.0) {
|
||||
delay(100);
|
||||
continue;
|
||||
}
|
||||
zbTempSensor.setTemperature(tsens_value);
|
||||
|
||||
temp_tmp = zbSetTemp.getAnalogOutput();
|
||||
if(temp_tmp < 10 || temp_tmp > 70) {
|
||||
temp_set = 55;
|
||||
} else {
|
||||
temp_set = temp_tmp;
|
||||
}
|
||||
|
||||
// check temp and control pump
|
||||
if (tsens_value >= zbAnalogTemp.getAnalogOutput() + 5.0 || tsens_value < 0) { // < 0 for safety if value is uninitialized
|
||||
Serial.printf("PUMP ON %.2f°C\r\n", tsens_value);
|
||||
digitalWrite(PUMP_PIN, HIGH);
|
||||
} else if (tsens_value <= zbAnalogTemp.getAnalogOutput() - 5.0) {
|
||||
Serial.printf("PUMP OFF %.2f°C\r\n", tsens_value);
|
||||
digitalWrite(PUMP_PIN, LOW);
|
||||
temp_delta = zbSetTempDelta.getAnalogOutput();
|
||||
if (tsens_value >= temp_set + temp_delta) {
|
||||
counter++;
|
||||
if(counter > 3) counter = 3;
|
||||
} else if (tsens_value <= temp_set - temp_delta) {
|
||||
counter--;
|
||||
if(counter < 0) counter = 0;
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
if(counter != 0) {
|
||||
Serial.printf("#%d PUMP ON %.2f°C\r\n", counter, tsens_value);
|
||||
digitalWrite(PUMP_PIN, HIGH);
|
||||
} else {
|
||||
Serial.printf("#%d PUMP OFF %.2f°C\r\n", counter, tsens_value);
|
||||
digitalWrite(PUMP_PIN, LOW);
|
||||
}
|
||||
|
||||
delay(2000);
|
||||
}
|
||||
}
|
||||
|
||||
/********************* Arduino functions **************************/
|
||||
void setup() {
|
||||
FastLED.addLeds<NEOPIXEL, LED_PIN>(leds, 1);
|
||||
leds[0] = CRGB::Red; FastLED.show();
|
||||
|
||||
// Init button switch
|
||||
pinMode(button, INPUT_PULLUP);
|
||||
pinMode(PUMP_PIN, OUTPUT);
|
||||
digitalWrite(PUMP_PIN, HIGH); // default to high just in case
|
||||
|
||||
Serial.begin(115200);
|
||||
// while(!Serial);
|
||||
leds[0] = CRGB::Orange; FastLED.show();
|
||||
// while(!Serial); // TODO comment out
|
||||
|
||||
Serial.println("Starting LED...");
|
||||
rgb.begin();
|
||||
rgb.setBrightness(30);
|
||||
rgb.setPixelColor(0,red); rgb.show();
|
||||
|
||||
|
||||
Serial.println("Starting temp task...");
|
||||
// Start Temperature sensor reading task
|
||||
xTaskCreate(temp_sensor_value_update, "temp_sensor_update", 3072, NULL, 10, NULL);
|
||||
|
||||
Serial.println("Setting up ZigBee endpoints...");
|
||||
// actual temp given by the thermometer
|
||||
zbTempSensor.setManufacturerAndModel("ESP32H2", "Furnace Pump");
|
||||
zbTempSensor.setMinMaxValue(-10, 125);
|
||||
|
|
@ -133,17 +168,27 @@ void setup() {
|
|||
zbTempSensor.addTimeCluster();
|
||||
|
||||
// temperature set as the threshold for pump activation/deactivation
|
||||
zbAnalogTemp.addAnalogOutput();
|
||||
zbAnalogTemp.setAnalogOutputApplication(ESP_ZB_ZCL_AI_TEMPERATURE_OTHER);
|
||||
zbAnalogTemp.setAnalogOutputDescription("Water Temperature (°C)");
|
||||
zbAnalogTemp.setAnalogOutputResolution(1);
|
||||
zbAnalogTemp.setAnalogOutputMinMax(20, 80);
|
||||
zbSetTemp.addAnalogOutput();
|
||||
zbSetTemp.setAnalogOutputApplication(ESP_ZB_ZCL_AI_TEMPERATURE_OTHER);
|
||||
zbSetTemp.setAnalogOutputDescription("Water Temperature (°C)");
|
||||
zbSetTemp.setAnalogOutputResolution(1);
|
||||
zbSetTemp.setAnalogOutputMinMax(10, 70);
|
||||
|
||||
// the delta value plus/minus the desired temperature
|
||||
zbSetTempDelta.addAnalogOutput();
|
||||
zbSetTempDelta.setAnalogOutputApplication(ESP_ZB_ZCL_AI_TEMPERATURE_OTHER);
|
||||
zbSetTempDelta.setAnalogOutputDescription("Temperature delta (°C)");
|
||||
zbSetTempDelta.setAnalogOutputResolution(0.5);
|
||||
zbSetTempDelta.setAnalogOutputMinMax(1, 10);
|
||||
|
||||
Serial.println("Adding ZigBee endpoints...");
|
||||
// Add endpoint to Zigbee Core
|
||||
Zigbee.addEndpoint(&zbTempSensor);
|
||||
Zigbee.addEndpoint(&zbAnalogTemp);
|
||||
Zigbee.addEndpoint(&zbSetTemp);
|
||||
Zigbee.addEndpoint(&zbSetTempDelta);
|
||||
|
||||
leds[0] = CRGB::Yellow; FastLED.show();
|
||||
// ZigBee endpoints setup
|
||||
rgb.setPixelColor(0,orange); rgb.show();
|
||||
|
||||
Serial.println("Starting Zigbee...");
|
||||
// When all EPs are registered, start Zigbee in End Device mode
|
||||
|
|
@ -155,17 +200,20 @@ void setup() {
|
|||
Serial.println("Zigbee started successfully!");
|
||||
}
|
||||
|
||||
leds[0] = CRGB::Green; FastLED.show();
|
||||
// ZigBee started successfully
|
||||
rgb.setPixelColor(0,yellow); rgb.show();
|
||||
|
||||
Serial.println("Connecting to network");
|
||||
Serial.println("Connecting to network...");
|
||||
while (!Zigbee.connected()) {
|
||||
Serial.print(".");
|
||||
delay(100);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
leds[0] = CRGB::Blue; FastLED.show();
|
||||
// ZigBee connected
|
||||
rgb.setPixelColor(0,green); rgb.show();
|
||||
|
||||
Serial.println("Getting time...");
|
||||
// Optional: If time cluster is added, time can be read from the coordinator
|
||||
timeinfo = zbTempSensor.getTime();
|
||||
timezone = zbTempSensor.getTimezone();
|
||||
|
|
@ -179,19 +227,24 @@ void setup() {
|
|||
Serial.println("Local time with timezone:");
|
||||
Serial.println(localTime, "%A, %B %d %Y %H:%M:%S");
|
||||
|
||||
// Start Temperature sensor reading task
|
||||
xTaskCreate(temp_sensor_value_update, "temp_sensor_update", 3072, NULL, 10, NULL);
|
||||
leds[0] = CRGB::White; FastLED.show();
|
||||
// localtime?
|
||||
rgb.setPixelColor(0,blue); rgb.show();
|
||||
|
||||
Serial.println("Setting default ZigBee values and intervals...");
|
||||
// Set reporting interval for temperature measurement in seconds, must be called after Zigbee.begin()
|
||||
// min_interval and max_interval in seconds, delta (temp change in 0,1 °C)
|
||||
// if min = 1 and max = 0, reporting is sent only when temperature changes by delta
|
||||
// if min = 0 and max = 10, reporting is sent every 10 seconds or temperature changes by delta
|
||||
// if min = 0, max = 10 and delta = 0, reporting is sent every 10 seconds regardless of temperature change
|
||||
zbTempSensor.setReporting(10, 300, 1);
|
||||
zbAnalogTemp.setAnalogOutput(60.0); // starting default value
|
||||
|
||||
leds[0] = CRGB::Black; FastLED.show();
|
||||
// min 10s, max 300s (5min), delta 1 (1 degree celcius)
|
||||
zbTempSensor.setReporting(10, 300, 1);
|
||||
// set default values
|
||||
zbSetTemp.setAnalogOutput(55.0); // starting default value
|
||||
zbSetTempDelta.setAnalogOutput(5.0); // starting default value
|
||||
|
||||
// everything done.
|
||||
rgb.setBrightness(0); rgb.show();
|
||||
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue