Dużo pliczków

wiedźmin - pudełko na karty, dodałem dziurę w podstawie i pokrywce
żeby dało się łatwiej podejrzeć karty

neptune 4 camera mount - nowa kamera, do szafki BROR

neptune 4 filament... - przesunąłem detektor filamentu do głowicy, więc
te modele są helperami żeby 1. trzymać detektor oraz 2. trzymać
obcinaczkę do filamentu

Oliwka pierścień - dla taty Oliwki inny rozmiar

Tłumik - dla seby
thumb rest - 1911 ulepszony

Dom/Wiedzmin_stary_swiat/na_karty.scad

@@ -3,56 +3,84 @@ include <BOSL2/std.scad>
 // EDITABLE VARIABLES
 
 $fn = 36;
+$slop = 1;
+t = 2;
 
+wing_h = 0.8;
+
+// rozmiar karty
+karta = [65,100];
+
+// Tablica o wartościach:
 // [wysokość pliku kart, "tekst", rozmiar tekstu],
 tab = [
     [35, "Karty Akcji", 10],
-    [19, "Karty Akcji postaci", 8],
+    [18, "Karty Akcji postaci", 8],
     // [4, "Atrybuty", 10], // za małe
-    [14, "Eksploracja Miasta", 8],
+    [13, "Eksploracja Miasta", 8],
-    [14, "Eksploracja Dziczy", 8],
+    [13, "Eksploracja Dziczy", 8],
-    [21, "Zdarzenia", 10],
+    [20, "Zdarzenia", 10],
     [11, "Eliksiry", 10],
-    [7.5 + 4 + 6, "Trofea szkół + Atrybuty + INNE", 5],
+    [7.5 + 3 + 5.5, "Trofea szkół + Atrybuty + INNE", 5],
     [18, "Potwory i ataki", 10]
     // [6, "INNE", 10]
 ];
 
-// rozmiar karty
-card = [65,100];
-t = 2;
-
 // END OF EDITABLE VARIABLES
 
+card = [karta[0]+2*$slop, karta[1]+2*$slop];
 out = [card[0]+2*t, card[1]+2*t];
 
-module box(h,txt, txt_size) {
+module box(h_in,txt, txt_size) {
+    h = h_in + 2*t;
     // bottom box
     difference() {
         // main body
         cuboid([each out, h],anchor=BOTTOM, rounding=t/2);
-        text3d(txt, h=t, orient=DOWN, center=true, spin=90, size=txt_size);
+        // text
+        right(card[0]/2 - txt_size) text3d(txt, h=t/4, orient=DOWN, anchor=TOP, center=true, spin=90, size=txt_size);
+        up(t) right(card[0]/2 - txt_size)  text3d(txt, h=t/4, orient=UP, anchor=TOP, center=true, spin=90, size=txt_size);
+        // hole in the bottom
+        left(txt_size/2) cuboid([out[0]/2 - txt_size,out[1]/2,t], chamfer=-t/4, anchor=BOTTOM);
         // hole for cards
-        up(t) cuboid([each card, h-t], anchor=BOTTOM);
+        up(t) cuboid([each card, h-t], anchor=BOTTOM, rounding=-t/2, edges=TOP);
         // cutouts
-        up(t) cuboid([card[0]/2 + t, card[1]*2, h-t], anchor=BOTTOM, rounding=-t, edges=TOP);
+        difference() {
-        up(t) cuboid([card[0]*2, card[1]/2 + t, h-t], anchor=BOTTOM, rounding=-t, edges=TOP);
+            union() {
+                cuboid([card[0]/2 + t, card[1]*2, h], anchor=BOTTOM, rounding=-t, edges=TOP);
+                cuboid([card[0]*2, card[1]/2 + t, h], anchor=BOTTOM, rounding=-t, edges=TOP);
+            }
+            cuboid([card[0]-$slop*2, card[1]-$slop*2, t], anchor=BOTTOM);
+        }
+        
     }
+    
     // top cover
-    fwd(out[1] + 10)
+    fwd(out[1] + 2)
     union() {
         // cover
         difference() {
-            cuboid([each out, t],anchor=BOTTOM, rounding=t/2);
+            cuboid([each out, t], anchor=BOTTOM, rounding=t/2);
-            text3d(txt, h=t, orient=DOWN, center=true, spin=90, size=txt_size);
+            // text
-        }
+            right(card[0]/2 - txt_size) down(0.1) text3d(txt, h=t/4, orient=DOWN, anchor=TOP, center=true, spin=90, size=txt_size);
-        up(t/2) cuboid([each card, t],anchor=BOTTOM, chamfer=t/2);
+            right(card[0]/2 - txt_size) up(t+0.1) text3d(txt, h=t/4, orient=UP, anchor=TOP, center=true, spin=90, size=txt_size);
-        // side wings
+            // hole in the top
-        left(out[0]/2 - t/2) cuboid([t,card[1]/2,h/2], anchor=BOTTOM, rounding=t/2);
+            down(0.01) left(txt_size/2) cuboid([out[0]/2 - txt_size,out[1]/2,t + 0.02], chamfer=-t/4, anchor=BOTTOM);
-        right(out[0]/2 - t/2) cuboid([t,card[1]/2,h/2], anchor=BOTTOM, rounding=t/2);
 
-        fwd(out[1]/2 - t/2) cuboid([card[0]/2,t,h/2], anchor=BOTTOM, rounding=t/2);
+        }
-        back(out[1]/2 - t/2) cuboid([card[0]/2,t,h/2], anchor=BOTTOM, rounding=t/2);
+        // corners
+        up(t) difference() {
+            cuboid([card[0]+t, card[1]+t, t],anchor=BOTTOM, chamfer=t, edges=TOP);
+            cuboid([card[0], card[1], 4*t]);
+            cuboid([out[0]*3/4, out[1], 4*t]);
+            cuboid([out[0], out[1]*3/4, 4*t]);
+        }
+        // side wings
+        left(out[0]/2 - t/2) cuboid([t,card[1]/2,h*wing_h], anchor=BOTTOM, rounding=t/2);
+        right(out[0]/2 - t/2) cuboid([t,card[1]/2,h*wing_h], anchor=BOTTOM, rounding=t/2);
+        
+        fwd(out[1]/2 - t/2) cuboid([card[0]/2,t,h*wing_h], anchor=BOTTOM, rounding=t/2);
+        back(out[1]/2 - t/2) cuboid([card[0]/2,t,h*wing_h], anchor=BOTTOM, rounding=t/2);
 
     }
 }

Neptune4/camera_mount.scad

@@ -0,0 +1,79 @@
+include <BOSL2/std.scad>
+include <BOSL2/screws.scad>
+
+t = 2;
+t2 = 4;
+$fn = 36;
+
+// connection to the camera
+cam_out_width = 25;
+cam_width = 15;
+cam_hex = "M3";
+cam_head_d = 5.5;
+cam_screw_l = 23.5;
+cam_hole_d = 4;
+cam_clearance = 3;
+
+// connection between parts
+conn_clearance = 0.2;
+conn_cam_distance = 25;
+conn_wall_distance = 23;
+conn_screw_d = 6;
+
+// wall mount
+mount_h = 20;
+mount_screw_d = 5;
+mount_bror_dist = 17;
+mount_bror_width = 5;
+
+
+// NOT EDIT: helper functions
+cam_out_width2 = (cam_out_width - cam_width)/2;
+h = cam_hole_d + 2*t;
+
+// connection to the camera
+yrot(90) difference() {
+    // body
+    union() {
+        cyl(h=cam_out_width, d=h);
+        cuboid([h,h,cam_out_width], anchor=FWD);
+    }
+    // cutout from the middle
+    cyl(h=cam_width, d=h + cam_clearance);
+    // hole for the screw
+    cyl(h=cam_out_width+t, d=cam_hole_d);
+    // hole for the screw heads: hex and round
+    up(cam_screw_l/2) cyl(d=cam_head_d, h=cam_out_width2, anchor=BOTTOM);
+    down(cam_screw_l/2) nut(spec=cam_hex, thickness=cam_out_width2, anchor=TOP);
+}
+
+// connection between parts
+back(conn_cam_distance) difference() {
+    // main body
+    union() {
+        cyl(h=h, d=cam_out_width);
+        up(h/2) cuboid([cam_out_width,conn_cam_distance - h,h/2-conn_clearance], anchor=TOP+BACK);
+        down(h/2) cuboid([cam_out_width,conn_wall_distance - t,h/2-conn_clearance], anchor=BOTTOM+FWD);
+    }
+    // slit in the middle
+    cyl(h=conn_clearance, d=cam_out_width*2);
+    // hole for screw
+    cyl(h=h, d=conn_screw_d);
+}
+
+// wall mount
+back(conn_cam_distance + conn_wall_distance) difference() {
+    union() {
+        // bottom chamfer
+        down(conn_clearance) cuboid([cam_out_width,t2,2*t], anchor=BOTTOM+BACK, rounding=-2*t, edges=BOTTOM+FWD);
+        // wall mount body
+        down(h/2) cuboid([cam_out_width,t2,mount_h+h/2],anchor=BOTTOM+BACK, rounding=cam_out_width/2, edges=[TOP+LEFT, TOP+RIGHT]);
+    }
+    // hole for screw
+    up(mount_h/2 - t) xrot(90) cyl(h=t2, d=mount_screw_d, anchor=BOTTOM, chamfer2=-1);
+    // holes for Ikea BROR mount
+    up(mount_screw_d) left(mount_bror_dist/2) 
+    fwd(t2/2) wedge([mount_h,mount_bror_width,mount_bror_width], anchor=TOP+FWD, orient=LEFT);
+    up(mount_screw_d)  yrot(180) fwd(t2/2) left(mount_bror_dist/2) wedge([mount_h,mount_bror_width,mount_bror_width], anchor=TOP+FWD, orient=LEFT);
+    
+}

Neptune4/filament_detector_head_holder.scad

@@ -0,0 +1,60 @@
+include <BOSL2/std.scad>
+
+head_dist = 54;
+head_pin_dist = 5;
+head_spacing = 9; // distance from upright
+head_d = 3.5;
+head_pin_d = 1.2;
+head_pin_h = 0.75;
+
+$fn = 72;
+
+bottom = [7,16,3];
+upright = [7,4,30];
+conn_up = 50;
+connector = [12,4,12];
+det_hole = 6;
+
+// connection to print head
+module conn() {
+difference() {
+    union() {
+        // bottom
+        cuboid(bottom, anchor=BOTTOM+BACK, chamfer=0.4);
+        // pin
+        fwd(head_spacing + head_pin_dist) cyl(d=head_pin_d, h=head_pin_h, anchor=TOP, chamfer1=0.2);
+    }
+    // hole for screw
+    fwd(head_spacing) cyl(d=head_d, h=bottom[2], anchor=BOTTOM, chamfer=-0.2);
+}
+}
+
+left(head_dist/2) conn();
+right(head_dist/2) conn();
+
+// upright to hold detector
+difference() {
+    union() {
+        // uprights
+        left(head_dist/2) cuboid(upright, chamfer=0.4, anchor=BOTTOM);
+        right(head_dist/2) cuboid(upright, chamfer=0.4, anchor=BOTTOM);
+        // bottom rounding for strength
+        left(head_dist/2) up(bottom[2])
+            cuboid([upright[0]-0.8,upright[1],upright[1]], chamfer=-4, edges=BOTTOM+FWD, anchor=BOTTOM);
+        right(head_dist/2) up(bottom[2])
+            cuboid([upright[0]-0.8,upright[1],upright[1]], chamfer=-4, edges=BOTTOM+FWD, anchor=BOTTOM);
+        // upper portion
+        chain_hull() {
+            left(head_dist/2) up(upright[2] - upright[1]/2)
+                cuboid([upright[0], upright[1], upright[1]], chamfer=0.4);
+            up(conn_up) cuboid(connector);
+            right(head_dist/2) up(upright[2] - upright[1]/2)
+                cuboid([upright[0], upright[1], upright[1]], chamfer=0.4);
+        }
+    }
+    // hole for screw for the detector
+    up(conn_up - det_hole/4) xrot(90) cyl(h=connector[1], d=det_hole, rounding=-0.2);
+}
+
+// mock filament detector
+// up(conn_up) fwd(15) cuboid([41,17,36]);

Neptune4/filament_guide_printer_top.scad

@@ -0,0 +1,34 @@
+include <BOSL2/std.scad>
+
+$fn = 36*5;
+t = 5;
+rounding = 1;
+
+// base to connect to the printer
+base_hole_distance = 40;
+base_frame_hole_d = 4.5;
+base_dim = [61,23,12];
+
+difference() {
+    // base
+    cuboid(base_dim, rounding=rounding);
+    // holes for screws
+    left(base_hole_distance/2) cyl(d=base_frame_hole_d, h=base_dim[2], chamfer=-1);
+    right(base_hole_distance/2) cyl(d=base_frame_hole_d, h=base_dim[2], chamfer=-1);
+}
+
+// PTFE tube holder
+tube_dist = 15;
+tube_d0 = 2.5;
+tube_d1 = 4.2;
+tube_d2 = 6;
+tube_h = base_dim[2];
+
+difference() {
+    union() {
+        fwd(base_dim[1]/2 - 2*rounding) cuboid([tube_d2, tube_dist + 2*rounding, tube_h], anchor=BACK, rounding=rounding, edges="Y");
+        fwd(base_dim[1]/2 + tube_dist) cyl(d=tube_d2, h=tube_h);
+    }
+    fwd(base_dim[1]/2 + tube_dist) cyl(d=tube_d0, h=tube_h, rounding=-rounding);
+    fwd(base_dim[1]/2 + tube_dist) cyl(d=tube_d1, h=tube_h, anchor=BOTTOM);
+}

Oliwka/pierscien.scad

@@ -1,14 +1,18 @@
 include <BOSL2/std.scad>
 include <BOSL2/joiners.scad>
 
-t=7.5;
+t=10;
-d = 80;
+d = 140;
-h = 100;
+h = 200;
+cut_h = 60;
+cut_h_in = 50;
+cut_d = 2.9;
 conn = 0;
 tr = 4; // trytytka szer
 tr_d = 1;
 
 $fn = 360;
+$slop = 0.5;
 
 difference() {
     torus(d_maj=d, d_min=t);
@@ -21,14 +25,24 @@ difference() {
     //     down(conn/2) cuboid([t*2,conn,conn]);
     //     xrot(90) tube(h=tr, id=t-tr_d, wall=t, rounding=0.3);
     // }
-    left(d/2) xrot(-90) rabbit_clip("female", t/2,t/2,0.5, 0.4,1, lock=true);
+    left(d/2) xrot(-90) rabbit_clip("female", t/2,t/2,0.5, 0.4,t/4 + $slop, lock=true);
 }
-right(d/2) xrot(-90) rabbit_clip("male", t/2,t/2,0.5, 0.4,1, lock=true);
+right(d/2) xrot(-90) rabbit_clip("male", t/2,t/2,0.5, 0.4,t/4, lock=true);
 
 
 for(i = [0:1] ) {
     zrot(90*i + 45) left(d/2) union() {
-        cyl(h=h, d=t, anchor=BOTTOM);
+        difference() {
+            cyl(h=h, d=t, anchor=BOTTOM);
+            for(i = [cut_h:cut_h:h]) {
+                up(i) union() {
+                    cyl(h=1, d=t*2);
+                    cyl(h=cut_h_in, d=cut_d);
+                    cyl(h=cut_d, d1=cut_d*2, d2=cut_d, anchor=BOTTOM);
+                    cyl(h=cut_d, d2=cut_d*2, d1=cut_d, anchor=TOP);
+                }
+            }
+        }
         up(h) cyl(h=t*2, d1=t, d2=0, anchor=BOTTOM);
     } 
 }

Sasza/bron/cz457/Tłumik.scad

@@ -20,17 +20,21 @@ test = 0; // 1 for exploded view
 $fn=36*5;
 
 // overall dimensions
-len = 220;
+len = 230;
 out_d = 22;
-t = 2;
+t = 2.5;
 bullet_hole_1 = 6.5; // for .22lr 5.6mm + some spare
-bullet_hole_2 = 8.5; // for .22lr 5.6mm + some spare
+bullet_hole_2 = 8; // for .22lr 5.6mm + some spare
 
 // threaded portion
 th_len = 20;
 th_spec = str("1/2-20,", th_len/10); // change to your barrel thread spec
 $slop = 0.15; // For my printer, no slop results in an extremely tight thread.
 
+// clamp
+cl_len = 50;
+cl_in_d = 13;
+
 // baffles
 baf_dist = 0;
 baf_h_num = 6;
@@ -87,11 +91,21 @@ module thread() {
     }
 }
 
+module clamp() {
+    up(len/2 + cl_len/2) difference() {
+        cyl(h=cl_len, d=out_d);
+        cyl(h=cl_len, d=cl_in_d);
+        cuboid([out_d, t, cl_len]);
+        down(cl_len/4 + out_d/4) cyl(h=out_d, d1=out_d, d2=0, anchor=down);
+    }
+}
+
 module silencer() {
     left(test*(out_d+5)) body();
     baffles();
     right(test*(out_d+5)) cap();
     right(test*(out_d+5)) thread();
+    // right(test*(out_d+5)) clamp();
 }
 
 silencer();

Sasza/bron/ft1911/thumb_rest.scad

@@ -15,7 +15,8 @@ chain_hull() {
         cuboid([t,thumb_size[1],t], anchor=LEFT+BOTTOM);
 }
 
-hinge_d = 2;
+hinge_d = 2.5;
+hinge_hole = 0.8;
 hinge_num = 4;
 hinge_h = 3; 
 
@@ -29,7 +30,8 @@ down(t - frame_dist) right(thumb_fwd) fwd(thumb_up) zrot(180+45) xrot(-90) diffe
 
             }
     }
-    up(0) right(hinge_d/2) fwd(hinge_d/2 + t + 0.1) cyl(d=1, h=thumb_size[1]*2, $fn=36);
+    up(0) right(hinge_d/2) fwd(hinge_d/2 + t + 0.1)
+        cyl(d=hinge_hole, h=thumb_size[1]*2, $fn=36);
 }
 
 right(thumb_fwd) fwd(thumb_up) zrot(180+45) down(t - frame_dist) yrot(-90) down(t)