Oliwka - palik; dom - pod monitory

Dom/pod_monitory.scad

@@ -0,0 +1,74 @@
+// Moduły PWM do LEDów
+module pwm_board() {
+  // PCB board
+  translate([0,-31,0]) union() {
+    cube([33,37,1.5], center=true);
+    translate([0,33-2,7.5]) rotate([90,0,0]) cylinder(d=8, h=20, $fn=50);
+  }
+}
+
+// guzik
+module switch() {
+  rotate([90,0,0]) union() {
+    cylinder(d=20, h=100);
+    rotate([0,0,0]) translate([-2.5,0,0]) cube([5,11,100]);
+    rotate([0,0,180]) translate([-2.5,0,0]) cube([5,11,100]);
+    rotate([0,0,90]) translate([-1,0,0]) cube([2,11,100]);
+  }
+}
+
+// wzkacniacz 2.1 z 3 potencjometrami
+module amp1() {
+  translate([0,0,14.25]) rotate([90,0,0])
+  for (i = [0,22.25, 44.5]) {
+    translate([i,0,0]) cylinder(d=8, h=15, $fn=50);
+  }
+  translate([-25,-70-15,5.5]) cube([101,70,1.5]);
+}
+
+// wzmacniacz 1 potencjometr
+module amp2() {
+  translate([0,0,15.75]) rotate([90,0,0]) cylinder(d=8, h=15, $fn=50);
+  translate([-18,-95-15,5]) cube([64,95,1.5]);
+}
+
+t = 1.5; // wall thickness
+
+h1 = 40; // wysokość 
+w1 = 215; // szerokość
+d1 = 120; // głębokość
+
+difference() {
+  translate([0,-12,-t]) union() {
+    cube([w1,t,h1]);
+    rotate([90,0,0]) difference() {
+      translate([0,0,0]) cube([w1,h1,d1]);
+      translate([t,t,0]) cube([w1-2*t, h1-2*t, d1+5]);
+    }
+  }
+  union() {
+    translate([25,0,0]) amp2();
+    translate([107,0,0]) amp1();
+    translate([200,0,20]) switch();
+  }
+}
+
+h2 = 22; // wysokość 
+w2 = 90; // szerokość
+d2 = 35; // głębokość
+
+translate([(w1-w2)/2,0,h1 + 5]) difference() {
+  translate([0,-12,-1.5]) union() {
+    cube([w2,t,h2]);
+    rotate([90,0,0]) difference() {
+      translate([0,0,0]) cube([w2,h2,d2]);
+      translate([t,t,0]) cube([w2-2*t, h2-2*t, d2+5]);
+    }
+
+  }
+  translate([20,0,0]) union() {
+    translate([0,5,5]) pwm_board();
+    translate([50,5,5]) pwm_board();
+
+  }
+}

Oliwka/palik2.scad

@@ -0,0 +1,78 @@
+include <BOSL2/std.scad>
+// model 1 - palik
+palik_d = 50;
+palik_h = 170;
+t=2;
+
+conn_clear=0.3; // clearance
+connect_h=15;
+
+// model 2 - podstawka
+nozki_l = 30;
+nozki_t = 3;
+nozki_ile = 3;
+
+noga_h = 50;
+noga_d = 5;
+
+gora_h = 15;
+
+dz_ile_kw = 3;
+dz_ile_kol = 3;
+
+module column_hex(ile_h, ile_d, size, h, angle) {
+  for(i=[0:ile_h]) {
+    translate([0,0,i*h]) rotate([0,0,i*(360/ile_d/2)]) union() {
+      for (j=[0:360/ile_d:360]) {
+        rotate([angle,30,j]) cylinder(d=size, $fn=6, h=100);
+      }
+    }
+  }
+}
+
+union() {
+  // palik z dziurami
+  difference() {
+    cylinder(d=palik_d, h=palik_h, $fn=360);
+    down(0.1) cylinder(d=palik_d-2*t, h=palik_h+0.2, $fn=360);
+    up(8) column_hex(11, 10, 15, 13, 90);
+  }
+  // cienszy element do łączenia
+  rotate([0,180,0]) difference() {
+    union() {
+      cylinder(d=palik_d, h=5, $fn=360);
+      cylinder(d=palik_d-2*t-2*conn_clear, h=connect_h, $fn=360);
+    }
+    down(1) cylinder(d=palik_d-4*t-2*conn_clear, h=connect_h+3, $fn=360/2);
+  }
+}
+
+// podstawka
+right(2*palik_d) union() {
+  // nóżki
+  for (i=[0:360/nozki_ile: 360]) {
+    rotate([0,0,i]) translate([0,-nozki_t/2,0])
+      cube([nozki_l, nozki_t, nozki_t]);
+  }
+  // noga
+  cylinder(h=noga_h, d=noga_d, $fn=20);
+  // góra
+  up(noga_h - t) union() {
+    up (gora_h/2) difference() {
+      cyl(d=palik_d, h=gora_h, $fn=360, rounding1=3);
+      down(t) cyl(d=palik_d-2*t, h=gora_h+3*t, $fn=360, rounding2=-5);
+    }
+      // dziury + podstawka
+    up(t/2 + 0.2) union() {
+      for(i=[0:360/dz_ile_kw:360]) {
+        rotate([0,0,i]) cube([palik_d-2*t,t,t], center=true);
+      }
+      for(i=[0:(palik_d-2*t)/dz_ile_kol: (palik_d-2*t)]) {
+        down(t/2) difference() {
+          cylinder(d=i+0.1, h=t, $fn=360);
+          down(0.1) cylinder(d=i-2*t, h=t+0.2, $fn=360);
+        }
+      }
+    }
+  }
+}