dużo zmian, płytka do kalibracji

Dom/suszarka.scad

@@ -0,0 +1,23 @@
+include <BOSL2/std.scad>
+
+in_d = 9;
+t = 2;
+zip_t = 0.75;
+zip_w = 7.5;
+zip_n = 3;
+zip_dist = 15;
+height = 60;
+
+$fn=36;
+
+difference() {
+  cyl(d=in_d+2*t, h=height, rounding=1);
+  down(0.01) cyl(d=in_d, h=height+0.02, rounding=-1);
+  for(i = [0:1:zip_n-1]) {
+    up(-(height-zip_dist)/2 + i*(height-zip_dist)/(zip_n-1)) difference() {
+      cyl(d=in_d+2*t+0.01, h=zip_w);
+      cyl(d=in_d+2*t-2*zip_t, h=zip_w, rounding=-1);
+    }
+  }
+  cube([100,1,100], center=true);
+}

Ojrzan/sup-cup-phone-holder-2.scad

@@ -4,7 +4,7 @@
 $fn=50; // number of facets to the cylinders - basically level of detail
 
 drink_rad = 46;     // radius of drink container - allow some wiggle room
-phone_width = 90/2;   // width of phone - allow some wiggle room
+phone_width = 100/2;   // width of phone - allow some wiggle room
 phone_depth = 8;    // depth of phone - allow some wiggle room
 
 

Oliwka/doniczka_ściana.scad

@@ -2,7 +2,7 @@ wall_h = 35;
 wall_t = 5;
 t = 5;
 
-doniczka_d = 90;
+doniczka_d = 95;
 wall_w = doniczka_d+2*t;
 dystans=20;
 
@@ -13,6 +13,8 @@ katownik_wciecie = 4.5;
 
 tab = (doniczka_d > 170)?((doniczka_d>240)?[-1, -0.334, 0.334, 1]:[-1,0,1]):[-1,1];
 
+$fn = 360;
+
 difference() {
   union() {
     // wall portion

Oliwka/palik2.scad

@@ -4,7 +4,7 @@ palik_d = 30;
 palik_h = 165;
 t=2.5;
 
-conn_clear=0.15; // clearance
+conn_clear=0.175; // clearance
 connect_h=15;
 
 // model 2 - podstawka
@@ -31,11 +31,11 @@ module column_hex(ile_h, ile_d, size, h, angle) {
   }
 }
 
-smallhex = [11,6,14,13.5,90];
+smallhex = [11,6,13.5,13.5,90];
 bighex = [8,4,20,18,90];
 hugehex = [5,3,25,24,90];
 
-tab = hugehex;
+tab = smallhex;
 
 union() {
   // palik z dziurami
@@ -58,8 +58,11 @@ union() {
 right(2*palik_d) union() {
   // nóżki
   for (i=[0:360/nozki_ile: 360]) {
-    rotate([0,0,i]) translate([0,-nozki_t/2,0])
+    rotate([0,0,i]) translate([0,-nozki_t/2,0]) union() {
-      cube([nozki_l, nozki_t, nozki_t]);
+        cube([nozki_l, nozki_t, nozki_t]);
+        translate([noga_d/3,nozki_t/2,nozki_t]) rotate([90,0,0])
+          rounding_edge_mask(l=nozki_t, r=10);
+      }
   }
   // noga
   cylinder(h=noga_h, d=noga_d, $fn=20);

Sasza/celownik/celownik2.scad

@@ -20,13 +20,13 @@ c_s = length>5 ? 1 : 0.4; // chamfer_size używane tylko do testów
 rail_height = -9.4 + clamp_inner/2 + 6.8; // -9.4 is to center the picatinny
 
 post_thickness=15;
-post_length=15;
+post_length=10;
 post_slit=2;
 post_chamfer = 1.665;
 
 nut_wall_t = 0.4;
 
-screw = "M2";
+screw = "M2.5";
 info = screw_info(name=screw, head="socket");
 hh = struct_val(info, "head_height");
 screw_head_h = post_thickness - hh - nut_wall_t;