zmian dużó

Artur/counter/LICENSE.txt

@@ -0,0 +1 @@
+This thing was created by Thingiverse user Scottimus, and is licensed under Creative Commons - Attribution - Non-Commercial - Share Alike

Artur/counter/README.txt

@@ -0,0 +1,4 @@
+Life (or anything) counter for table-top games by Scottimus on Thingiverse: https://www.thingiverse.com/thing:3351902
+
+Summary:
+This is an original life (or points or arrows or anything) counter for games like D&D or Magic the Gathering.IMPORTANT NOTE: I recommend printing the 'all except tube' variation in one print, then printing the tube by itself because it's the most likely to fail in my experience. The other files are included for your convenience. If you have trouble printing the tube, try it with a raft and/or supports.Like my work? Check out my Patreon page: https://patreon.com/scottreece2019-08-20 edit: I just added 2 updated files: Number-only-OPTIONAL.stl and Two-rings-clip-and-tube-OPTIONAL.stl. Both were uploaded earlier, but had some problems. The scales were off by 100x and the tube was missing.

Artur/counter/files/test.txt

@@ -0,0 +1 @@
+This file upload is to try and fix the broken download link.

Neptune4/ikea_45l/README.md

@@ -0,0 +1 @@
+https://www.printables.com/model/146367-ikea-samla-45l-filament-buffering-dry-box-v2/files

Oliwka/palik2.scad

@@ -1,24 +1,24 @@
 include <BOSL2/std.scad>
 // model 1 - palik
-palik_d = 50;
+palik_d = 30;
-palik_h = 170;
+palik_h = 165;
-t=4;
+t=2.5;
 
 conn_clear=0.3; // clearance
 connect_h=15;
 
 // model 2 - podstawka
 nozki_l = 30;
-nozki_t = 3;
+nozki_t = 4;
 nozki_ile = 3;
 
-noga_h = 50;
+noga_h = 70;
-noga_d = 5;
+noga_d = 7;
 
 gora_h = 15;
 
 dz_ile_kw = 3;
-dz_ile_kol = 2;
+dz_ile_kol = 1;
 dz_t = 2;
 
 module column_hex(ile_h, ile_d, size, h, angle) {
@@ -36,7 +36,7 @@ union() {
   difference() {
     cylinder(d=palik_d, h=palik_h, $fn=360);
     down(0.1) cylinder(d=palik_d-2*t, h=palik_h+0.2, $fn=360);
-    up(8) column_hex(11, 10, 15, 13, 90);
+    up(8) column_hex(10, 6, 15, 14, 90);
   }
   // cienszy element do łączenia
   rotate([0,180,0]) difference() {
@@ -66,7 +66,8 @@ right(2*palik_d) union() {
       // dziury + podstawka
     up(dz_t/2 + 0.2) union() {
       for(i=[0:360/dz_ile_kw:360]) {
-        rotate([0,0,i]) cube([palik_d-2*t,dz_t,dz_t], center=true);
+        rotate([0,0,i]) translate([(palik_d - 2*t)/4,0,0]) 
+          cube([(palik_d-2*t)/2,dz_t,dz_t], center=true);
       }
       for(i=[0:(palik_d-2*t)/dz_ile_kol: (palik_d-2*t)]) {
         down(dz_t/2) difference() {

Oliwka/podstawka.scad

@@ -1,14 +1,17 @@
 
 ile = 3;
 
-rozmiar = 135;
+rozmiar = 85;
-wysokosc = 50;
+wysokosc = 120;
-grubosc = 15;
+wysokosc_2 = 85;
+grubosc = 5;
+
+$fn=360;
 
 for (i = [0:360/ile:360]) {
   rotate(i, [0,0,1]) translate([rozmiar/2,0,0])
     cylinder(h=wysokosc+grubosc/2, d=grubosc);
-  translate([0,0,wysokosc]) rotate([0,90,0]) rotate(i, [1,0,0])
+  translate([0,0,wysokosc_2]) rotate([0,90,0]) rotate(i, [1,0,0])
     cylinder(h=rozmiar/2, d=grubosc);
   rotate(i, [0,0,1]) translate([rozmiar/2, 0, 0])
     sphere(d=grubosc);

Sasza/krzesło_kółka.scad

@@ -0,0 +1,40 @@
+// Plastikowa wkładka do krzesła biurowego
+include <BOSL2/std.scad>
+
+// część wewnętrzna
+in_width = 17.7;
+in_width2 = 17.0;
+in_length = 30;
+in_h=36.9; // including the half-circle
+in_h2=36.0;
+
+in_hole_d=10.0;
+in_hole_dist = 13; // hole distance from the end cap
+in_hole_h = 20 + 5; // +5 for clearance
+
+// część zewnętrzna
+out_t = 5;
+out_d = 10;
+
+out_width = in_width + out_t;
+out_h = in_h + out_t;
+
+$fn=360;
+
+// model
+// wnętrze
+difference() {
+  union() {
+    cube([in_width2, in_length, in_h2-in_width2/2]);
+    translate([in_width2/2,0,in_h2-in_width2/2]) rotate([-90,0,0])
+      cylinder(d=in_width2, h=in_length);
+  }
+  translate([in_width2/2,in_hole_dist,-0.1]) cylinder(d=in_hole_d, h=in_hole_h);
+}
+// zewnątrz
+translate([out_width/2 - out_t/2,0,(out_h-out_width/2)/2 - out_t/2])
+  union() {
+  cuboid([out_width,5,out_h-out_width/2], chamfer=1);
+  translate([0,0,out_h/2-out_width/4]) rotate([90,0,0])
+    cyl(d=out_width, h=out_t, chamfer=1);
+}