diff --git a/Jan/Customizeable_Drawer_Divider.scad b/Jan/Customizeable_Drawer_Divider.scad
new file mode 100644
index 0000000..8bab238
--- /dev/null
+++ b/Jan/Customizeable_Drawer_Divider.scad
@@ -0,0 +1,89 @@
+//!OpenSCAD
+// https://www.thingiverse.com/thing:2764423/files
+
+//The length of the divider
+Divider_Length = 130;
+//Wether to create a linear connector on the left/top end
+Left_Top_Connector = true;
+//Wether to invert the left/top connector
+Left_Top_Connector_Inverted = false;
+//Wether to create a linear connector on the right/bottom end
+Right_Bottom_Connector = true;
+//Wether to invert the right/bottom connector
+Right_Bottom_Connector_Inverted = true;
+//The positions to create a slit of Divider_Thickness width for perpendicular connections at
+Positions_Connectors = [30, 65, 100];
+
+//The height of the divider
+Divider_Height = 50;
+//The thickness of the divider (Should give an even number if diveded by layer height)
+Divider_Thickness = 2;
+//The length of overlap regions for connecting
+Overlap_Length = 20;
+//The diameter of the holes and knobs for connecting (Sould be smaller than Overlap_Length
+Diameter_Connectors = 10;
+//The amount of connectors per overlap region (Must be smaller than Divider_Height divided by Diameter_Connectors
+Amount_Connectors = 2;
+//Wether to ignore problems that could result in a failing print
+Ignore_Problems = false;
+
+//Circle Resolution
+$fn = 32;
+
+//Internal Calculations
+Reduced_Divider_Length = Divider_Length - (Left_Top_Connector ? Overlap_Length / 2 : 0) - (Right_Bottom_Connector ? Overlap_Length / 2 : 0);
+Left_Top_Offset = Left_Top_Connector ? Overlap_Length / 2 : 0;
+
+if (!Ignore_Problems
+    && (   (Overlap_Length < Diameter_Connectors)
+        || ((Divider_Height / Diameter_Connectors) < Amount_Connectors)
+        )
+    )
+    translate([0, Divider_Height, 0])
+        text("Warning! Print might not give a good result", halign="center", valign="center");
+difference() {
+    cube([Reduced_Divider_Length, Divider_Height, Divider_Thickness], center=true);
+    
+    for (x = Positions_Connectors)
+        translate([-Reduced_Divider_Length/2+x-Left_Top_Offset, Divider_Height/4 + 0.01, 0])
+            cube([Divider_Thickness, Divider_Height/2, Divider_Thickness+0.02], center=true);
+}
+
+if (Left_Top_Connector) {
+    translate([-(Reduced_Divider_Length+Overlap_Length)/2, 0, 0]) {
+        if (Left_Top_Connector_Inverted)
+            mirror([0,0,1])
+                Connector();
+        else
+            Connector();
+    }
+}
+
+if (Right_Bottom_Connector) {
+    translate([(Reduced_Divider_Length+Overlap_Length)/2, 0, 0]) {
+        rotate([180,0,0]) {
+            if (Right_Bottom_Connector_Inverted)
+                mirror([0,0,1])
+                    Connector();
+            else
+                Connector();
+        }
+    }
+}
+
+module Connector() {
+    union(){
+        difference(){
+            translate([0, 0, -Divider_Thickness/4])
+                cube([Overlap_Length, Divider_Height, Divider_Thickness/2], center=true);
+            
+            for (i = [0 : 2 : Amount_Connectors - 1])
+                translate([0, -Divider_Height/2 + ((i+0.5)*Divider_Height/Amount_Connectors), -Divider_Thickness/4 + 0.01])
+                    cylinder(h=Divider_Thickness/2 + 0.03, r1=(Diameter_Connectors-Divider_Thickness/2)/2, r2=(Diameter_Connectors+Divider_Thickness/2)/2, center=true);
+        }
+        
+        for (i = [1 : 2 : Amount_Connectors - 1])
+                translate([0, -Divider_Height/2 + ((i+0.5)*Divider_Height/Amount_Connectors), Divider_Thickness/4 + 0.01])
+                    cylinder(h=Divider_Thickness/2 + 0.03, r1=(Diameter_Connectors+Divider_Thickness/2)/2, r2=(Diameter_Connectors-Divider_Thickness/2)/2, center=true);
+    }
+}
\ No newline at end of file