Modele Janka

Jan/podstawka_żyłki.scad

@@ -0,0 +1,40 @@
+peg_size = 11;
+base_size = 60;
+
+base_thickness = 5;
+peg_length = 50;
+
+length = 70/2;
+
+include <BOSL2/std.scad>
+include <BOSL2/joiners.scad>
+
+module dovetail_cutsom() {
+  dovetail("male", width=15, height=3, slide=base_size, angle=20, taper=2);
+}
+
+difference() {
+  union(){
+    cylinder(h=base_thickness, d=base_size);
+    translate([0,0,base_thickness]) cylinder(h=peg_length, d=peg_size);
+  }
+  dovetail_cutsom();
+}
+
+difference() {
+  union(){
+    cylinder(h=base_thickness, d=base_size);
+    translate([0,0,base_thickness]) cylinder(h=peg_length, d=peg_size);
+  }
+  dovetail_cutsom();
+}
+
+right(50) union() {
+  dovetail_cutsom();
+  rotate([0,0,180]) translate([0,base_size, 0]) dovetail_cutsom();
+}
+
+right(80) difference() {
+  translate([0,0,2.5]) cube([20,60,3.5], center=true);
+  dovetail_cutsom();
+}

Jan/spławik.scad

@@ -0,0 +1,19 @@
+
+length = 116.0;
+width = 10;
+height = 20;
+
+peg_width = 2;
+how_many_pegs = 16.0;
+peg_height = 12;
+
+union(){
+  cube([length, width, height-peg_height]);
+  for ( i = [0:how_many_pegs] ) {
+    translate([i*(length-peg_width)/how_many_pegs, 0, height - peg_height])
+      cube([peg_width, width, peg_height]);
+  }
+}
+
+echo((length-peg_width)/how_many_pegs);
+echo((length-peg_width)/how_many_pegs - peg_width);

Jan/spławik_głębokość.scad

@@ -0,0 +1,37 @@
+
+
+hor_cub_size = 5;
+hor_cub_width = 1;
+
+cub_space = 0.2;
+
+vert_cub_size = 4;
+vert_cube_h = 6;
+
+translate([hor_cub_size/2 + cub_space*2,0,0])  cube([hor_cub_size,vert_cube_h,hor_cub_width], center=true);
+translate([-(hor_cub_size/2 + cub_space*2),0,0])  cube([hor_cub_size,vert_cube_h,hor_cub_width], center=true);
+
+rotate([0,0,-2]) translate([0.7,0,0])
+  cube([hor_cub_width,vert_cube_h,vert_cub_size],center=true);
+rotate([0,0,2]) translate([-0.7,0,0])
+  cube([hor_cub_width,vert_cube_h,vert_cub_size],center=true);
+
+long_h = 20;
+long_d = 2.5;
+
+cyl_d = 10;
+cyl_h = 46;
+cyl_hole_d = 4;
+
+translate([cyl_d/2 - long_d/2, long_h/2, 0]) rotate([90,0,0])
+  cylinder(h=long_h, d=long_d, center=true, $fn=20);
+translate([-(cyl_d/2 - long_d/2), long_h/2, 0]) rotate([90,0,0])
+  cylinder(h=long_h, d=long_d, center=true, $fn=20);
+
+slit_width = 1;
+  
+translate([0, long_h + cyl_h/2, 0]) rotate([90,0,0]) difference() {
+  cylinder(d=cyl_d, h=cyl_h, center=true);
+  cylinder(d=cyl_hole_d, h=cyl_h+0.1, center=true, $fn=20);
+  translate([0,-cyl_d/2,0]) cube([slit_width,cyl_d,cyl_h+ 0.1], center=true);
+}